You are an unregistered user, you can register here
Navigation

Information

Site

Donations
If you wish to make a donation you can by clicking the image below.


 
Go Back   The Unreal Admins Page > Forums > Unreal Admins > Unreal Tournament > UT Server - Windows Specific

Reply
Thread Tools Display Modes
  #1  
Unread 26th November, 2004, 09:39 AM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default ok ,what am i missing ??

i have two computers #1 & #2 going through "lan" a lynksys router, #1 can host games "shows on masterserver list" and can join in on #2 no prob. however server #2 i cant be seen on the serverlist or in the lan games list.
this is the error im getting in the log when i try to run dedicated:
Log: Spawning: IpDrv.UdpBeacon
Log: Spawning: IpServer.UdpServerQuery
Log: Spawning: IpServer.UdpServerUplink
Log: Spawning: IpServer.UdpServerUplink
Log: Spawning: IpServer.UdpServerUplink
Log: Spawning: UWeb.WebServer
Log: Bound to UWeb.dll
Log: Level is Level DM-Deck16][.MyLevel
Log: Bringing Level DM-Deck16][.MyLevel up for play (20)...
ScriptLog: InitGame: ?Name=seagreenbeetle[mppc]?Class=BotPack.
TFemale1?team=1?skin=FCommandoSkins.cmdo?
Face=FCommandoSkins.ivana?Voice=BotPack.
VoiceFemaleOne?Game=BotPack.DeathMatchPlus?
Mutator=BatThwap.BatThwap,MoreGore.MoreGore,
BDBMapVote304.BDBMapVote,Revenge.Revenge?Listen
ScriptLog: Base Mutator is DM-Deck16][.DMMutator0
ScriptLog: Mutators BatThwap.BatThwap,MoreGore.MoreGore,BDBMapVote304. BDBMapVote,Revenge.Revenge
ScriptLog: Add mutator BatThwap.BatThwap
ScriptLog: Add mutator MoreGore.MoreGore
ScriptLog: Add mutator BDBMapVote304.BDBMapVote
ScriptLog: Detected GameType = Botpack.DeathMatchPlus
ScriptLog: Total Maps = 37
ScriptLog: Add mutator Revenge.Revenge
ScriptLog: UdpServerQuery(crt): Port 7778 successfully bound.
Log: Resolving unreal.epicgames.com...
Log: Resolving master0.gamespy.com...
Log: Resolving master.mplayer.com...
ScriptLog: Initiating local logging...
ScriptLog: Initiating world logging...
Init: Game engine initialized
Log: Startup time: 2.827584 seconds
Log: Resolved unreal.epicgames.com (207.135.145.4)
ScriptLog: UdpServerUplink: Master Server is unreal.epicgames.com:27900
ScriptLog: UdpServerUplink: Port 7779 successfully bound.
Log: Resolved master0.gamespy.com (207.38.8.34)
ScriptLog: UdpServerUplink: Master Server is master0.gamespy.com:27900
ScriptLog: UdpServerUplink: Port 7779 successfully bound.
Log: AInternetLink Resolve failed: Can't find host master.mplayer.com (WSAHOST_NOT_FOUND)
ScriptLog: UdpServerUplink: Failed to resolve master server address, aborting.

i have looked at this thread http://www.unrealadmin.org/forums/showthread.php?t=8060 but all my settings are identical and still does not show on server list.
i also tried the deleteing of MasterServerAddress=master1.mplayer.com MasterServerPort=27900 from the ini but still nothing , im sure the problem is elsewhere. :[
yes i have "Advertise server "checked .
any one got a clue what i should try? i want to run dedicated on #2.
Reply With Quote
  #2  
Unread 26th November, 2004, 10:48 AM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

If this is XP, make sure that the built in firewall is off.
Reply With Quote
  #3  
Unread 26th November, 2004, 07:15 PM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

no fire wall unless its in the router ,i have port 7777 open to ut, and i am using win 2000. something basic is wrong cus compy#2 cant even be seen on the list when its a listening server.
Reply With Quote
  #4  
Unread 26th November, 2004, 07:18 PM
chai's Avatar
chai chai is offline
Rampage
 
Join Date: Jul 2004
Location: Las Vegas, Nevada
Posts: 89
Default

I think its the mplayer line...I think you should delete any reference to mplayer...that worked for me when I ran a ut server.
__________________
Reply With Quote
  #5  
Unread 26th November, 2004, 08:12 PM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

Quote:
Originally Posted by chai
I think its the mplayer line...I think you should delete any reference to mplayer...that worked for me when I ran a ut server.
witch line and where? in the unrealtournament.ini?
Reply With Quote
  #6  
Unread 27th November, 2004, 07:34 AM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

ok i reistalled ut and 436 patch, maybee thiss will fix. . . nope
i can host games on #2 but are not on the server list. but can be seen on lan games tab.
any suggestions??
Reply With Quote
  #7  
Unread 27th November, 2004, 09:38 AM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

Is your router configured with the same rules for those two machines?
Reply With Quote
  #8  
Unread 27th November, 2004, 07:17 PM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

i have the router open at port 7777 - 7777 and also 80 is open for both unreal tournament servers. should i have a seperate port open for each server?
i didnt before and both could host. then i f-disked and reintalled 2000 and now #2 is were the problem.

Last edited by kortniechan : 27th November, 2004 at 07:33 PM.
Reply With Quote
  #9  
Unread 27th November, 2004, 08:18 PM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

If they have the same internet IP, then you have to use different ports for them. I dont see how you could get it to work in the past using the same port.
Reply With Quote
  #10  
Unread 27th November, 2004, 08:29 PM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

in my router it is set :
UT server #1 ports 7777 - 7777 enabled 192.168.1.100
thats all i had in there and i thought it was strange because my #2 is 192.168.101
so i changed it to look like this :
UT server #1 ports 7777 - 7777 enabled 192.168.1.100
UT server #2 ports 7777 - 7777 enabled 192.168.1.101

it still cant host on #2 but shows on lan games.
does the port need to be diferent for each server. and does each port have to be bigger? example 7777 - 7778 ? what should i set them ? and if i use a alternate port for #2 do i need to go into UT somewhere and change it also cuz it uses 7777 defaultly. ??

Last edited by kortniechan : 27th November, 2004 at 08:34 PM.
Reply With Quote
  #11  
Unread 27th November, 2004, 09:03 PM
AnthraX's Avatar
AnthraX AnthraX is offline
Administrator
 
Join Date: Jun 2004
Location: Ghent (Belgium)
Posts: 1,380
Default

make your second server use port 8888 and if you configure your firewall to host servers, always open both the gameport (eg 8888) and the queryport (which is the gameport+1 eg 8889)
Reply With Quote
  #12  
Unread 27th November, 2004, 09:28 PM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

ok this will be esier for me if i show this is my router, what needs to change?
my servers are [BRAHMA] and [SHIVA]
goal : listening server on brahma dedicated server on shiva

do you know witch port is for what? i dont. i think i need to

Last edited by kortniechan : 28th November, 2004 at 09:27 AM.
Reply With Quote
  #13  
Unread 3rd December, 2004, 05:27 AM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default Please someone help

I have changed my router and UT settings to what you see here below, and still i cannot see server on list / listening or dedicated . i cant even see it on lan games. wtf do i do? ive read and read and can not figure out what im dooing wrong.
Anyone Help Please ! ! im going mad , i am sure it is something stupid and easy but i am trying realy hard to learn .
Reply With Quote
  #14  
Unread 3rd December, 2004, 06:28 AM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

If you cant see it in the LAN browser, then its not a problem with the router. The rules in the router applies to Internet/LAN traffic.
Reply With Quote
  #15  
Unread 3rd December, 2004, 10:40 AM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

before i set it as it is currently i could see it in lan games tab but still not on server list. i think i am missing something basic , witch ports should i have open for what to host? if i can confirm the ports being correct then i can find where the problem realy is.
Reply With Quote
  #16  
Unread 3rd December, 2004, 10:59 AM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

Quote:
Originally Posted by kortniechan
before i set it as it is currently i could see it in lan games tab but still not on server list. i think i am missing something basic , witch ports should i have open for what to host? if i can confirm the ports being correct then i can find where the problem realy is.
Lets say one of your servers are running on port 7777 and the other one on port 8888. You will then have to open 4 ports for connections from the Internet:

7777-7778 -> 192.168.1.100
8888-8889 -> 192.168.1.101

If you use web admin then you also have to open the web port for each server. For most home routers you dont have to open ports for outbound traffic.

Last edited by PizzaMan : 3rd December, 2004 at 11:01 AM.
Reply With Quote
  #17  
Unread 3rd December, 2004, 09:29 PM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

PizzaMan i must say YOU ROCK ! ! nobody else would help me and this is basic stuff, im learning for the first time so Thank You !!! back to:
i asume the ports im opening are 7777 : are serverport and 7778 : are queryport ?
in the advanced option UT : MasterServerPort 29000? do i need to open this port or do anything with?
Reply With Quote
  #18  
Unread 3rd December, 2004, 11:18 PM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

Quote:
Originally Posted by kortniechan
PizzaMan i must say YOU ROCK ! ! nobody else would help me and this is basic stuff, im learning for the first time so Thank You !!! back to:
i asume the ports im opening are 7777 : are serverport and 7778 : are queryport ?
in the advanced option UT : MasterServerPort 29000? do i need to open this port or do anything with?
just trying to help you dude

The master server port is the port that UT use to connect to the Master server, and that is what you will see in the server browser. Dont change it. Query port is allways play port + 1. Hope this helps you
Reply With Quote
  #19  
Unread 4th December, 2004, 12:49 AM
kortniechan's Avatar
kortniechan kortniechan is offline
Unstoppable
 
Join Date: Aug 2004
Location: Atown
Posts: 225
Default

Well The ports are all set correct and no dice , still not on lan or serverlist hmmmmm
Quote:
Originally Posted by "PizzaMan
If you cant see it in the LAN browser, then its not a problem with the router. The rules in the router applies to Internet/LAN traffic.
then what is the problem ? we have eliminated the router . :/
Reply With Quote
  #20  
Unread 4th December, 2004, 11:42 AM
PizzaMan's Avatar
PizzaMan PizzaMan is offline
Holy Shit!!
 
Join Date: Jun 2004
Location: Bergen - Norway
Posts: 2,389
Default

Can you connect to your server using "open location"?
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT +1. The time now is 06:06 AM.


 

All pages are copyright The Unreal Admins Page.
You may not copy any pages without our express permission.